Under the current National Construction Code, new homes must achieve a minimum thermal performance rating determined by the applicable edition and any state or territory variations, plus meet a Whole-of-Home energy budget. The previous minimum was replaced when the new provisions took effect.

The Two Requirements
Thermal Performance — Measures the building shell’s ability to maintain comfortable temperatures. Assessed using NatHERS-accredited software that models heating and cooling energy requirements for your specific climate zone.
Whole-of-Home Energy Budget — A separate assessment of annual energy use from fixed appliances: heating/cooling systems, hot water, lighting, pool/spa pumps. On-site energy generation can offset consumption to meet the budget.
Both requirements must be met for compliance.
State Adoption
Most states have adopted the current NCC with updated thermal requirements:
- Victoria: Mandatory from the date set by the state government
- NSW: Equivalent via updated BASIX standards from the date set by the state government
- Queensland: Updated thermal requirements adopted
- WA: Mandatory from the date set by the state government
- SA: From the date set by the state government
- Tasmania: confirm the current requirement with your building surveyor or CBOS Tasmania
- NT: Continues with the rating under the edition of the BCA adopted in that territory
Always confirm current requirements with your building surveyor.
What Affects Your Rating
Orientation — North-facing living areas capture winter sun. East/west glazing needs shading or limiting. This is the most cost-effective factor—and it’s free if considered early in design.
Insulation — R-values specified by your energy assessor based on climate zone. Typical requirements vary by climate zone and building element.
Glazing — High-performance glazing is usually required. Double glazing isn’t mandatory but most homes need it to some degree. Low-E coatings, thermally broken frames, and appropriate solar heat gain values matter.
Air Sealing — Draughts undermine insulation. Seal around windows, doors, and service penetrations.
Shading — External shading (eaves, verandahs, shutters) is far more effective than internal blinds.
Steel Frames and Thermal Performance
Steel conducts heat more readily than timber, creating potential thermal bridges. This is managed through:
- Thermal break strips between frame and cladding
- External insulation systems
- Higher R-value wall insulation
- Careful detailing at openings and junctions
Properly detailed steel frame homes achieve the required ratings. The frame material is one factor among many—orientation and glazing typically have greater impact on the final rating.
The Assessment Process
An accredited NatHERS assessor models your design and provides:
- Star rating for thermal performance
- Whole-of-Home score
- Specifications for insulation, glazing, and other elements
This report is required for building approval. Cost varies depending on design complexity.
Engage your assessor early in design—changes are cheap on paper, expensive during construction.