Your foundation choice depends on site conditions, budget, and building design. Each option has trade-offs.

Concrete Slab on Ground
The most common foundation for residential construction in Australia. Types and approximate costs:
Waffle pod slab — Uses polystyrene pods to create a grid of concrete beams. Suits stable soils (Class A or S). Cost depends on the slab size and site conditions.
Raft slab — Reinforced slab with thickened edge beams. Better for reactive soils (Class M, H). Cost depends on the slab size and site conditions.
Stiffened raft — Additional internal beams for highly reactive soils (Class E, P). Cost depends on the slab size and site conditions.
Advantages: Solid feel underfoot, good thermal mass, no subfloor maintenance, suits polished concrete or tiled finishes.
Disadvantages: Expensive on sloping sites (requires cut and fill), no access to services once poured, can crack on reactive soils if not specified correctly.
Steel Subfloor (Bearers and Joists)
Light gauge steel bearers and joists supported on piers, screw piles, or steel posts. Floor sheeting fixes to the joists.
Advantages: Works on steep or difficult sites with minimal earthworks. Services run easily in subfloor space. Termite resistant. Fast installation. Can be supplied as part of the kit home package.
Disadvantages: Floor may feel less solid than concrete. May need acoustic insulation between floors. Subfloor requires ventilation. Some floor finish options are limited.
Screw Piles
Galvanised steel piles screwed into ground using hydraulic machinery. Support steel or timber bearers above.
Advantages: Extremely fast. Minimal excavation and site disturbance. Work well in poor soil. Adjustable heights suit uneven ground. Can be installed in wet conditions.
Disadvantages: Cost per pile depends on site conditions and installation requirements. Installation may be affected by ground conditions. Installation requirements depend on the equipment needed.
Choosing the Right Option
Flat block, stable soil — Slab on ground is usually most economical.
Flat block, reactive soil — Engineered raft slab, or consider elevated construction to avoid soil movement issues.
Sloping block — Steel subfloor on screw piles or piers typically cheaper than extensive cut and fill for a slab.
Flood-prone area — Elevated construction may be required.
Tight access — Screw piles can be installed with smaller equipment than concrete trucks require.
A geotechnical (soil) report is required for foundation design. This classifies your soil and determines what type of foundation is appropriate. Cost depends on the scope of the report and site conditions.